{"id":3703,"date":"2021-03-05T13:30:39","date_gmt":"2021-03-05T13:30:39","guid":{"rendered":"https:\/\/canelectric.ca\/?p=3703"},"modified":"2021-03-05T13:30:39","modified_gmt":"2021-03-05T13:30:39","slug":"light-fixture-installation-everything-you-need-to-know","status":"publish","type":"post","link":"https:\/\/canelectric.ca\/light-fixture-installation-everything-you-need-to-know\/","title":{"rendered":"Light Fixture Installation: Everything You Need to Know"},"content":{"rendered":"

Light Fixture Installation<\/span><\/strong><\/h3>\n

One of the most cost effective and quickest upgrades you can do to your house look by upgrading lighting and replacing light fixtures and its easy and simple electrical upgrade which will make your home brighter and appealing.<\/p>\n

Most light fixtures come with instructions that will help you to assemble and install the light, which I recommend you read the manufacturer\u2019s instructions before starting to replace the light fixture. This step-by-step lighting installation will help you to replace most light fixtures including sconce lights, pendant light, track light, ceiling light, wall light, and more.<\/p>\n

Followings are simple, easy, and step by step procedure which will help you install the light fixture safely and correctly. Most light fixtures and light boxes are universal and standard, so the lighting installation procedure you will learn here will help you to be able to install most lights fixtures. To make it easier for you to install the light is good idea to take a picture of the old light\u2019s wiring or even a video, especially when there are more than a three-conductor wire inside the box.<\/p>\n

\"lamp\"<\/p>\n

When installing a light fixture, the black\/red wire is hot, and the white wire is neutral and the bare is ground. Before doing anything turn off power & double check circuit with non-contact voltage tester to ensure there is no power in the light. Always turn off power for the light you want to install or remove from circuit breaker panel and if your electrical panel is not labelled or you are not sure which circuit is for the light you are replacing turn off the main breaker which will turn off electricity to your entire house.<\/p>\n

Tools you need for light installation<\/strong>: [Screwdrivers (4-in-1, or Philips, flat, Roberson), non-contact circuit tester, pliers, wire strippers, wire cutter, safety glasses, ladder, flashlight, and wire connectors (wire nuts)]<\/p>\n

CAUTION:<\/span> Whenever working with electrical, being careful and caution are number one priority and make sure you follow the electrical code and building code requirements, and first check with your local electrical code authority if you are allowed to do that electrical task if not contact a licensed electrician. If you are not sure about your home wiring hire a certified electrician. And always turn off the power before doing anything. For light fixture installation & FREE ELECTRICAL QUOTES<\/a><\/span> contact our Edmonton electricians.<\/p>\n<\/div>

<\/div>
<\/div><\/div>
<\/div>